From Wikipedia, the free encyclopedia
A computer file is a piece of arbitrary information, or resource for storing information, that is available to a computer program and is usually based on some kind of durable storage. A file is durable in the sense that it remains available for programs to use after the current program has finished. Computer files can be considered as the modern counterpart of the files of printed documents that traditionally existed in offices and libraries, which are the source of the term.
As far as the operating system is concerned, a file is in most cases just a sequence of binary digits. At a higher level, where the content of the file is being considered, these binary digits may represent integer values or text characters, or anything else; Turing completeness shows that the bits might represent anything. It is up to the program using the file to understand the meaning and internal layout of information in the file and present it to a user as a document, image, song, or program.
At any instant in time, a file might have a size, normally expressed in bytes, that indicates how much storage is associated with the file. In most modern operating systems the size can be any whole number up to a system limit. However, the general definition of a file does not contstain its instant size as having any real meaning, unless the data within the file happens to correspond to data within a pool of persistent storage.
For example, the file to which the link /bin/ls points in a typical Unix-like system probably has a defined size that seldom changed. Compare this with /dev/null. This is a file, but its size may be open to question.
Information in a computer file can consist of smaller packets of information (often called records or lines) that are individually different but share some trait in common. For example, a payroll file might contain information concerning all the employees in a company and their payroll details; each record in the payroll file concerns just one employee, and all the records have the common trait of being related to payroll—this is very similar to placing all payroll information into a specific filing cabinet in an office that does not have a computer. A text file may contain lines of text, corresponding to printed lines on a piece of paper. Alternatively, a file may contain an arbitrary binary image (a BLOB) or it may contain an executable.
The way information is grouped into a file is entirely up to the person designing the file. This has led to a plethora of more or less standardized file structures for all imaginable purposes, from the simplest to the most complex. Most computer files are used by computer programs. These programs create, modify and delete files for their own use on an as-needed basis. The programmers who create the programs decide what files are needed, how they are to be used and (often) their names.
In some cases, computer programs manipulate files that are made visible to the computer user. For example, in a word-processing program, the user manipulates document files that she names herself. The content of the document file is arranged in a way that the word-processing program understands, but the user chooses the name and location of the file, and she provides the bulk of the information (such as words and text) that will be stored in the file.
Many applications pack all their data files into a single file, using internal markers to discern the different types of information contained within. The data files used by games such as Doom and Quake are examples of this.
Files on a computer can be created, moved, modified, grown, shrunk and deleted. In most cases, computer programs that are executed on the computer handle these operations, but the user of a computer can also manipulate files if necessary. For instance, Microsoft Word files are normally created and modified by the Microsoft Word program in response to user commands, but the user can also move, rename, or delete these files directly by using a file manager program such as Windows Explorer (on Windows computers).
In Unix-like systems, user-space processes do not normally deal with files at all; the operating system provides a level of abstraction which means that almost all interaction with files from user-space is through hard links. Hard links allow a name to be associated with a file (or they can be anonymous - and therefore temporary); files do not have names in the OS. For example, a user-space program cannot delete a file; it can delete a link to a file (for example, using the shell commands rm or mv or, in the anonymous case, simply by exiting), and if the kernel determines that there are no more existing links to the file, it may then delete the file. In fact, it really is only the kernel that deals with files, but it serves to handle all user-space interaction which (virtual) files in a manner that is transparent to the user-space programs.
Although the way programs manipulate files varies according to the operating system and file system involved, the following operations are typical:
- Creating an anonymous file, plus zero or more named links to it (this is Unix-like behaviour)
- Creating a file with a particular name (this is Windows-like behaviour)
- Setting attributes that control operations on the file
- Opening a file to use its contents
- Reading or updating the contents
- Committing updated contents to durable storage
- Closing the file, thereby losing access until it is opened again
Identifying and organizing files
In modern computer systems, files are typically accessed using names. In some operating systems, the name is associated with the file itself. In others, the file is anonymous, and is pointed to by links that have names. In the latter case, a user can identify the name of the link with the file itself, but this is a false analogue, especially where there exists more than one link to the same file.
Files (or links to files) can be located in directories. However, more generally, a directory can contain either a list of files, or a list of links to files. Within this definition, it is of paramount importance that the term "file" includes directories. This permits the existence of directory hierarchies. A name that refers to a file within a directory must be unique. In other words, there must be no identical names in a directory. However, in some operating systems, a name may include a specification of type that means a directory can contain an identical name to more than one type of object such as a directory and a file.
In environments in which a file is named, a file's name and the path to the file's directory must uniquely identifiy it among all other files in the computer system—no two files can have the same name and path. Where a file is anonymous, named references to it will exist within a namespace. In most cases, any name within the namespace will refer to exactly zero or one file. However, any file may be represented within any namespace by zero, one or more names.
Any string of characters may or may not be a well-formed name for a file or a link depending upon the context of application. Whether or not a name is well-formed depends on the type of computer system being used. Early computers permitted only a few letters or digits in the name of a file, but modern computers allow long names (some up to 255) containing almost any combination of unicode letters or unicode digits, making it easier to understand the purpose of a file at a glance. Some computer systems allow file names to contain spaces; others do not. Such characters such as / or \ are forbidden. Case-sensitivity of file names is determined by the file system. Unix file systems are usually case sensitive and allow user-level applications to create files whose names differ only in the case of characters. Microsoft Windows supports multiple file systems, each with different policies regarding case-sensitivity. The common FAT file system can have multiple files whose names differ only in case if the user uses a disk editor to edit the file names in the directory entries. User applications, however, will usually not allow the user to create multiple files with the same name but differing in case.
Most computers organize files into hierarchies using folders, directories, or catalogs. (The concept is the same irrespective of the terminology used.) Each folder can contain an arbitrary number of files, and it can also contain other folders. These other folders are referred to as subfolders. Subfolders can contain still more files and folders and so on, thus building a tree-like structure in which one “master folder” (or “root folder” — the name varies from one operating system to another) can contain any number of levels of other folders and files. Folders can be named just as files can (except for the root folder, which often does not have a name). The use of folders makes it easier to organize files in a logical way.
When a computer allows the use of folders, each file and folder has not only a name of its own, but also a path, which identifies the folder or folders in which a file or folder resides. In the path, some sort of special character—such as a slash—is used to separate the file and folder names. For example, in the illustration shown in this article, the path /Payroll/Salaries/Managers uniquely identifies a file called Managers in a folder called Salaries, which in turn is contained in a file called Payroll. The folder and file names are separated by slashes in this example; the topmost or root folder has no name, and so the path begins with a slash (if the root folder had a name, it would precede this first slash).
Many (but not all) computer systems use extensions in file names to help identify what they contain. On Windows computers, extensions consist of a dot or period at the end of a file name, followed by a few letters to identify the type of file. An extension of .txt identifies a text file; the .doc extension identifies any type of document or documentation, commonly in the Microsoft Word file format; and so on. Even when extensions are used in a computer system, the degree to which the computer system recognizes and heeds them can vary; in some systems, they are required, while in other systems, they are completely ignored if they are present.
Many modern computer systems provide methods for protecting files against accidental and deliberate damage. Computers that allow for multiple users implement file permissions to control who may or may not modify, delete, or create files and folders. A given user may be granted only permission to modify a file or folder, but not to delete it; or a user may be given permission to create files or folders, but not to delete them. Permissions may also be used to allow only certain users to see the contents of a file or folder. Permissions protect against unauthorized tampering or destruction of information in files, and keep private information confidential by preventing unauthorized users from seeing certain files.
Another protection mechanism implemented in many computers is a read-only flag. When this flag is turned on for a file (which can be accomplished by a computer program or by a human user), the file can be examined, but it cannot be modified. This flag is useful for critical information that must not be modified or erased, such as special files that are used only by internal parts of the computer system. Some systems also include a hidden flag to make certain files invisible; this flag is used by the computer system to hide essential system files that users must never modify
In physical terms, most computer files are stored on hard disks—spinning magnetic disks inside a computer that can record information indefinitely. Hard disks allow almost instant access to computer files.
On large computers, some computer files may be stored on magnetic tape. Files can also be stored on other media in some cases, such as writeable compact discs, Zip drives, etc.
Backing up files
When computer files contain information that is extremely important, a back-up process is used to protect against disasters that might destroy the files. Backing up files simply means making copies of the files in a separate location so that they can be restored if something happens to the computer, or if they are deleted accidentally.
There are many ways to back up files. Most computer systems provide utility programs to assist in the back-up process, which can become very time-consuming if there are many files to safeguard. Files are often copied to removable media such as writeable CDs or cartridge tapes. Copying files to another hard disk in the same computer protects against failure of one disk, but if it is necessary to protect against failure or destruction of the entire computer, then copies of the files must be made on other media that can be taken away from the computer and stored in a safe, distant location.
File systems and file managers
The way a computer organizes, names, stores and manipulates files is globally referred to as its file system. All computers have at least one file system; some computers allow the use of several different file systems. For instance, on newer MS Windows computers, the older FAT-type file systems of MS-DOS and old versions of Windows are supported, in addition to the NTFS file system that is the normal file system for recent versions of Windows. Each system has its own advantages and disadvantages. Standard FAT allow only eight-character file names (plus a three-character extension) with no spaces, for example, whereas NTFS allows much longer names that can contain spaces. You can call a file Payroll records in NTFS, but in FAT you would be restricted to something like payroll.dat (unless you were using VFAT, a FAT extension allowing long file names).
File-manager programs are utility programs that allow you to manipulate files directly. They allow you to move, create, delete and rename files and folders, although they do not actually allow you to read the contents of a file or store information in it. Every computer system provides at least one file-manager program for its native file system. Under Windows, the most commonly used file manager program is Windows Explorer.
The word "file" appears in the context of computer storage as early as 1952, referring to information stored on punched cards. In early usage people regarded the underlying hardware (rather than the contents) as a file. For example, the IBM 350 disk drives were called "disk files." Systems like the 1962 Compatible Time-Sharing System featured file systems, which gave the appearance of several "files" on one storage device, leading to the modern usage of the term. File names in CTSS had two parts, a user-readable "primary name" and a "secondary name" indicating the file type. This convention remains in use by several operating systems today, including Microsoft Windows. Although the current term "register file" shows the early concept of files, it has largely disappeared.
- ^ Robert S. Casey, et al. Punched Cards: Their Applications to Science and Industry, 1952. ISBN 0-442-15213-2.
- ^ Martin H. Weik. Ballistic Research Laboratories Report #1115. March 1961. pp. 314-331.
- ^ Fernando J. Corbató et al. "An Experimental Time-Sharing System." May 3, 1962.
- ^ Jerome H. Saltzer CTSS Technical Notes. Project MIT-LCS-TR016
- File manager
- File system
- File copying
- File deletion
- File size
- Object composition
External links and references
- Dot What? Detailed information on file extensions and the programs that use them.
- Large list of file extensions: File-extensions.org
- File Extension Archives
- File Extension database
- FILExt — The File Extension Source — Site for looking up file extensions.
- Startup Files — Windows Startup Files Information.